| Customization: | Available |
|---|---|
| Type: | Egg Tay Machine |
| Sheet Former Type: | Cylinder Mould |
|
Still deciding? Get samples of US$ 60/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Egg tray machine uses waste paper as raw materials to produce different kinds of products according to your requirements, such as egg trays, egg cartons, egg boxes, apple trays, fruit trays, industrial trays, seeding trays etc. Our machine include pulp making system ,forming system and drying system.
systerm compisition of Egg tray making machine
of 4000pcs/hr Used paper egg tray making machine manufacturer
| Model | HY-4000M |
| Production capacity | 3600-4000pieces/hour(according to products) |
| Power | 380Vs/220Vs/50Hzs(Three mutually four lines) |
| Working shop requirement | Length ≥35m,Width≥12m,Height≥6m |
| Container requirement for transport | 4 of 40'HP |
| Mechanistic Dimensions | L25000*W3000*H3000MM |
| Net weigh | 30000KG |
| Electricity consumption | 221.15KW installed |
| Material consumption | 250~280kg/h |
| Water consumption | 650-1000kg/h |
| Operator Required | 5~6 people/shift,24 hours ,3 shift |
Advantages of Egg tray making machine
1. Easy to operate
2. Environmental protection
3. Only need a small workshop
4. Use is great, you just change the mould , you can get all kinds of trays
Equipment Process
Pulping system
(1) Put the raw material into the pulper and add an appropriate amount of water for a long time to stir the waste paper into pulp and store it in the storage tank.
(2) Put the pulp in the slurry tank into the pulping tank, adjust the pulp concentration in the pulping tank, and further stir through the homogenizer through the white water of the return pool and the thick slurry of the storage tank. After adjusting to the applicable pulp, put it into the feeding pool to be used in the molding system.
Equipment used: pulping machine, homogenizer, slurry pump, vibrating screen, pulp disintegrator
2. Forming system
(1) The pulp in the supply tank is supplied into the molding machine, and is adsorbed by the vacuum system, and the pulp is left on the mold by the mold on the equipment to be formed, and the white water is sucked and transported back into the pool through the vacuum pump.
(2) After the mold is adsorbed, the transfer mold is blown out by the positive pressure of the air compressor, and the molded product is blown from the molding die to the rotary mold, and is sent out by the transfer mold.
Equipment used: molding machine, mold, vacuum pump, vacuum tank, pump, air compressor, mold cleaning machine
3. Drying system
(1) Natural drying method: The product is dried directly by weather and natural wind.
(2) Traditional drying: brick tunnel kiln, heat source can choose natural gas, diesel, coal, dry wood,A heat source such as liquefied petroleum gas.
(3) New multi-layer drying line: 6-layer metal drying line can save more than 30% energy compared to transmission drying. The main heat source is clean energy such as natural gas, diesel oil, liquefied petroleum gas and methanol.
4. Finished product auxiliary packaging
(1) Automatic stacking machine
(2) Baler
(3) Transfer conveyor
Main Features
High precision servo motor drive,high efficiency and energy-saving drying line.
1,Use precision reducer servo motor forming and transferring to ensure smiith and fast operation.
2,Use absolute encoder to achieve accurate correction.
3,The use of bronze casting static and dynamic ring structure is more suitable for product dewatering process.
4,The use of mechanical structure to ensure that the mold close on both sides evenly.
5,Large capacity; Water content is low;Save the cost of drying.
){kind=link}