Stainless steel cylinder mold |
Extract the pulp fiber to felt |
Alloy dyer cylinder |
Dry the wet paper |
Exhaust hood of dryer cylinder |
To cover the dryer and collect the hot & moist air |
Φ600 Axial-flow ventilator |
To ventilate and pull out the hot & moist air in the exhaust hood |
Roots vacuum pump |
To provide the vacuum force for the suction box |
Vacuum suction box |
To absorb the water in the wet paper |
Air compressor |
To provide the compressed air for the pneumatic device |
Frequency conversion controlling cabinet |
To control the running speed of the machine |
3m3 High concentration hydra-pulper |
Break the recycle paper into pulp |
1.8m2 High frequency vibrating screen |
To separate and remove the small impurity in the pulp |
Φ700mm impeller |
To stir the pulp and make sure the pulp and water mixed well |
0.5m2 pressure screen (Slotted screen) |
To make the pulp more finer |
35m3 Bleacher (include drive part) |
To whiten the pulp through bleaching |
Φ330mm pulp refiner |
To make the pulp much finer and smoothe |
Low concentration sand remover |
To remove the sand and impurity in the water and pulp |
Pulp pump |
To provide the pulp for the needed machine |
Electrical operation cabinet |
To control the machines run or stop |
1T Boiler (burning coal ) |
To provide the hot steam for the dryers |